62 Machinery Tools found in Tregear NSW

Laser Wizard are proud of the quality of our staff and our equipment. As at September 2015 we have just installed the most up to date Trumpf laser in Australia. This 4m x 2m 5KW. laser is capable of cutting up to 20mm stainless steel. It compliments our other two Trumpf lasers and a 2Kw. Laser Lab machine. Laser Wizard also has a Tehni waterjet machine capable of cutting brass, copper, laminated material, stone, aluminium, rubber and many other materials that are not suitable for cutting on the laser machines. Although laser and waterjet cutting is our specialty, Laser Wizard has the capabilities to do more than that. Laser Wizard have three CNC Safan folding machines. These Safan bending machines are electric presses not hydraulic. They are around 50% faster than a hydraulic press and use far less power as they only use power when pressing a fold. Laser Wizard has the capacity to fold up to 4m. long on our 220 ton x 4m press. We also have a 3m press and a new 1.2m ergonomic high speed press for smaller high volume parts. This equates to cheaper prices for our customers. Laser Wizard has a well equipped welding division capable of MIG and TIG welding of mild steel, stainless steel and aluminium. Laser Wizard also has spot welding and resistance stud welding capabilities. Laser Wizard services also include clinch nut inserts, drilling and tapping, rumbling, and linishing of stainless steel. Laser Wizard saw a need for further services for our customers so we established a close relationship with some other service providers. As a result we can offer some very competitive pricing on powder coating, galvanising, zinc plating and anodising. Our staff however are our biggest asset. They are highly trained in the sheetmetal business and can assist our customers with advice on material selection, design, compatibility and functionality. Contact us for a solution to your fabrication requirements. Ron Thomson, business owner. Read more

Laser Wizard Pty Ltd

8 Anne St, St Marys, NSW, 2760

Open today

Mon

8:00 am - 5:00 pm

Tue

8:00 am - 5:00 pm

Wed

8:00 am - 5:00 pm

Thu

8:00 am - 5:00 pm

Fri

8:00 am - 5:00 pm

Sat

Closed

Sun

Closed

Deals available

Be the first to review this business - Write a review

sponsored listing

Building Supplies

New

Access Service Australia Pty Ltd

1/74 Glendenning Rd, Glendenning, NSW, 2761

Deals available

Be the first to review this business - Write a review

sponsored listing

Building Supplies

New

(02) 4731 1391

United Tools Penrith

119 Coreen Ave, Penrith, NSW, 2750

Deals available

Be the first to review this business - Write a review

sponsored listing

Machinery & Tools Manufacturers

New

Keble's Trading Pty Ltd

St Marys, NSW, 2760

Deals available

Be the first to review this business - Write a review

sponsored listing

Machinery & Tools Manufacturers

New

(02) 4730 6026

Toolmakers for over 30 years

Pitt Tooling Services Pty Ltd

4, 8 Lambridge Pl, Penrith, NSW, 2750

Deals available

Be the first to review this business - Write a review

sponsored listing

Machinery & Tools Manufacturers

New

(02) 9671 7811

Since 2005 Interequip deals in automotive workshop and garage equipments. We import high quality products and supply in Australia, New Zealand and Fiji at lowest price. Our reliable distributors are Autel, BulletPro, Autoalign and M&B Engineering Italy. We have an extensive list of products for cars, trucks and heavy vehicles. We ensure that our clients experience fair deals in products and services offered by us. Products Vehicle Hoists Brake Lathes Diagnostic Scanners Gas analyzer Tyre Changer Wheel Aligner Wheel Balancer Read more

Interequip Pty Ltd

U24/ 33 Holbeche Rd, Arndell Park, NSW, 2148

Deals available

Be the first to review this business - Write a review

sponsored listing

Machinery & Tools Manufacturers

New

Austech brings an eager and fresh approach to customer service. Armed with high quality products and genuine customer engagement. We are defined by our staff and partners. Our team of product specialists cover a vast spectrum of the metal finishing, composite production, machine design and application market, as well as specialist concrete construction products. We bring decades of hands-on, can-do focus to the metal, aluminum, timber and stainless-steel markets with focus and a clear mind set. Read more

Austech Supplies

12/197 Power St, Glendenning, NSW, 2761

Open today

Mon

8:00 am - 4:30 pm

Tue

8:00 am - 4:30 pm

Wed

8:00 am - 4:30 pm

Thu

8:00 am - 4:30 pm

Fri

8:00 am - 4:30 pm

Sat

Closed

Sun

Closed

Deals available

Be the first to review this business - Write a review

sponsored listing

Machinery & Tools Manufacturers

New

(02) 9672 1288

Call 02 9672 1288 for forklift Sales, Hire, Service or Repair. All makes & models. We offer Competitive rates. Since 1981, All Areas Forklift has been the Sydney experts in Material Handling Equipment. Our professional team of Mobile Mechanics are ready and equipped to tackle any size job. We sell, hire out (fully maintained), service and repair all makes and models. These range from pallet jacks to 48-ton container forklifts of any brand, be them new, near new or used. We also provide forklift battery rejuvenation services that save customers thousands of dollars by eliminating the cost of having to purchase new forklift batteries. Whether you need to buy, lease, rent, finance, hire, service, or repair heavy-duty, counter balance, all terrain, enclosed cabin, high reach, reach truck, flame proof, scissor lift, order picker, side loader, pallet truck, pedestrian, pallet jack, ride-on, container, wav, walkie stacker, explosion proof, low reach, narrow aisle, turret truck, stock picker, or pallet stacker forklift; All Areas Forklift has the materials handling solution for you. We service the Sydney metro area and greater Sydney, going as far as Newcastle, Katoomba, and Port Kembla. Read more

All Areas Forklift Hire

12 Kenoma Pl, Arndell Park, NSW, 2148

Open today

Mon

8:00 am - 6:00 pm

Tue

8:00 am - 6:00 pm

Wed

8:00 am - 6:00 pm

Thu

8:00 am - 6:00 pm

Fri

8:00 am - 6:00 pm

Sat

Closed

Sun

Closed

Deals available

Be the first to review this business - Write a review

sponsored listing

Machinery & Tools Manufacturers

New

1300 404 512

When it comes to delivering premium CNC machines paired with premium quality service, INNOVYNC stands unrivalled. At its core, our philosophy transcends the physical, encompasses the technological, and rises to a new level of innovation. Through our unique blend of technical know how, creativity and ethical business practice, we are placed squarely in the position of nation wide industry leaders and we do not take this responsibility lightly. Forged in the turbulence of 2020 by former electrical engineer Pierre Sullivan, our fully-fledged advanced manufacturing supply service is here to bring you the very best technology and care that you could wish for. Stemming from the former Unimac Machinery, INNOVYNC's speciality is after-sale service. Maintaining machines within the stone, glass, and advanced materials spaces across Australia and New Zealand, the honesty, respect, and service excellence extended to our customers has developed longstanding, solid relationships with people long after the initial sale. From the get-go, we endeavour to bring you value. We know the full capabilities of each cutting-edge machine under our roof, and do the work to ensure that you find a perfect fit. The top-notch CNC machines we source, come from the world's best European manufacturers, so you can be rest assured that they'll perform to perfection. It's in every atom of an ultra-sophisticated state-of-the-art tool, after all. You can expect expert installation, maintenance, repairs, and fast spare parts replacements with us long after you've sealed the deal. We're well acquainted with what it takes to run a high-tech machine efficiently and make every effort to apply ourselves to each client in our care. Our ultimate aim is to bring our signature service quality to industrial automation throughout our part of the world and see production flourish. We welcome you to follow our journey along the way and be involved in a new era of machine excellence unfolding before your eyes Read more

innovync

Unit 16/13 Holbeche Rd, Arndell Park, NSW, 2148

Deals available

Be the first to review this business - Write a review

sponsored listing

Machinery & Tools Manufacturers

New

Olds Elevator Technology - Bulk Material Conveyor Equipment Conveyors and Bulk Materials Handling DSH Systems Archimedys screw auger products

(02) 9623 4744

Emtt Pty Ltd

U 5/ 22 Anne St, St Marys, NSW, 2760

Open today

Mon

9:00 am - 5:00 pm

Tue

9:00 am - 5:30 pm

Wed

9:00 am - 5:30 pm

Thu

9:00 am - 5:00 pm

Fri

9:00 am - 5:00 pm

Sat

Closed

Sun

Closed

Deals available

Be the first to review this business - Write a review

sponsored listing

Machinery & Tools Manufacturers

New