CEDARSHIELD
CEDARSHIELD is a premium-quality semi-transparent timber finish specially formulated to enhance and protect timber surfaces against the harsh Australian climate. This scientifically-proven formula utilises the most recent technology and superior-quality ingredients to achieve the maximum protection against damaging environmental elements for both dressed and rough-sawn timber. The careful formulation yields a premium product which is easy to apply and outlasts alternative products.
Guaranteed not to crack, peel or blister when applied according to label directions or CEDARSHIELD will supply sufficient coating to recoat affected areas.
Uses
CEDARSHIELD is suitable for application to Western Red cedar weatherboards, railings, verandah posts etc., and can also be used with stunning effect on most other timbers. CEDARSHIELD is not recommended for use on windows, doors, decking or outdoor furniture.
Application
Stir thoroughly prior to application and regularly during application. For best results, apply three coats of CEDARSHIELD to ensure sufficient film thickness to adequately protect the timber surface. Initially, CEDARSHIELD has an opaque milky appearance which quickly clears; then when dry it has the warm appearance of natural timber. If necessary the first coat can be thinned with 5% water (50cc/litre) when painting in hot, dry conditions. Avoid painting in direct hot sunlight and when the temperature is below 10°C. Ensure an even coverage on all surfaces including side and end grain. Allow 2 hours between coats, depending upon conditions and before the likelihood of rain or condensation.
Read more
101 Northumberland Rd, Auburn, NSW, 2144
Open todaysponsored listing
